Call 714-525-0277
All Major Credit Cards Accepted
ISO 9001:2008 Registered

Urethane Rubber

Our Goal is to be your first choice... Products Proudly Made in the USA.

Urethane rubber

 

  • Matching specifications exactly - Polymer products may also be shaped into their final form through a molding process. In this process, the final shape of the end product, such as a ball, is determined by the shape and contour of a mold cavity. Molding is used when the final product needs to be conjoined and transitional between planes, as opposed to the continuous, non-transitional profile of an extruded product. There are three basic types of molding processes used to shape polymer products: compression, transfer and injection. Other forms of molding, such as bladder molding, are variations of the three basic types.

 

  • Compression Molding - Compression molding takes place as two plates of mold are forced together. A slightly oversized rubber preform (raw compound) is shaped to approximately fit into the mold cavity. When the plates are squeezed together, the preform is compressed and forced to conform to the mold cavity. A molding press is used to provide the necessary force to close the mold. Excess material, or flash, that squeezes out is pushed into grooves cut into the top plate and later trimmed off. Once the curing or vulcanizing process is complete, the mold is opened and the molded product can be removed).

 

  • Consumer Electronics
  • Medical Equipment/Devices
  • Automotive
  • Heavy Equipment
  • Sports Equipment
  • Aerospace/Military
  • Contact one of our professionals or send us a drawing.

materials

  • SBR
  • Neoprene (Chloroprene Polymer)
  • EPDM (Ethylene Propylene)
  • Buna-N (Nitrile)
  • Natural Rubber
  • Butyl
  • Hypalon
  • Urethane
  • Silicone
  • Fluorosilicone
  • Fluoroelastomer
  • Viton (R)
  • Thermoplastic Rubber
  • FDA Rubber

We do high volume commercial stamping of metallic & non-metallic gaskets, washers and shims.

S&H Rubber. specializes in precision die cutting of washers, gaskets and diaphragms with the ability to hold +/-.005 (five thousandth) on critical dimensions.

We manufacture simple O.D./I.D. washers and gaskets to custom shapes and complex configurations. We manufacture gaskets and from most non-metallic materials including rubber, sponge, paper, plasitc and foam. Our extensive tooling inventory and in-house die department means rapid turn around for you. S&H Rubber meets precision tolerancing by manufacturing our own dies. We have a full machine shop for quick turn-around and precision tooling.

View Sample Parts

S&H Rubber manufactures molded and extruded rubber parts.

With our diverse equipment, we can run one part to one million. Our numerous molding presses allow us to be vesatile for quick set-ups and turn-around delivery. We have ready sources for numerous SPEC materials and we are established on several QPL-qualitfied product list.

Materials We Use
contact
1141 E. Elm Ave.
Fullerton, CA 92831
Phone: 714-525-0277
CERTIFICATIONS
S&H Rubber is an ISO 9001:2008 and AS9100C certified. S & H Rubber is a world-class, versatile supplier of custom molded and rubber extrusion products